Spring Hanger (Deflection : 25mm)

The VH61 type anti-vibration spring hanger prevents the transfer of vibration generated from equipment and/or stress resulted from thermal expansion in the pipes and ducts during operation. Unlike the SH type, it uses a V-bolt instead of the housing, which allows it to withstand a dynamic load. Using the coil spring with a static deflection of 25 mm, it maintains the system's natural frequency to 3~5 Hz and using the CR type guide Rubber attached on the top plate, it prevents the high frequency transferred through pipes and ducts from passing into the structure on top of the hanger. In addition, it can be assembled with 60% of the available load using the pre-setting nut to prevent the equipment from moving around by the distortion of the spring, and because the spring is coupled with V-bolt, the spring does not fall apart when moving the mount. (Option) The hanger rod can be installed using the hole on the top/bottom plates to suspend the equipment.