Seismic Spring Moun

- The FSL51 series, a model with a static displacement of 50mm, is used for heavy-duty equipment such as cooling towers, chillers, and others that have differences in installation weight. The mount is equipped with vertical displacement limiters on the left and right sides to deal with height changes caused by weight changes due to treatment for retained water. Failure to install vertical displacement limiters may cause severe deformation and damage to the pipes connected to the equipment. The upper housing is equipped with fixing bolts depending on the applied load, and a spring and leveling bolts on the upper housing to facilitate leveling. The housing is corrosion resistant as standard and can be hot-dip galvanized and custom painted on customer request. The load applied to the product is identified by the color of the spring, and the spring is powder-coated. Rubber pads are attached to the bottom of the lower housing to prevent slipping and reduce the transmission of high-frequency vibrations.

- The FSL52 series, a model with a static displacement of 50mm, is used for heavy-duty equipment such as cooling towers, chillers, and others that have differences in installation weight. The mount is equipped with vertical displacement limiters on the left and right sides to deal with height changes caused by weight changes due to treatment for retained water. Failure to install vertical displacement limiters may cause severe deformation and damage to the pipes connected to the equipment. The upper housing is equipped with fixing bolts depending on the applied load, and a spring and leveling bolts on the upper housing to facilitate leveling. The housing is corrosion resistant as standard and can be hot-dip galvanized and custom painted on customer request. The load applied to the product is identified by the color of the spring, and the spring is powder-coated. Rubber pads are attached to the bottom of the lower housing to prevent slipping and reduce the transmission of high-frequency vibrations.

- The FSL62 series, a model with a static displacement of 50mm, is used for heavy-duty equipment such as cooling towers, chillers, and others that have differences in installation weight. The mount is equipped with vertical displacement limiters on the left and right sides to deal with height changes caused by weight changes due to treatment for retained water. Failure to install vertical displacement limiters may cause severe deformation and damage to the pipes connected to the equipment. The upper housing is equipped with fixing bolts depending on the applied load, and a spring and leveling bolts on the upper housing to facilitate leveling. The housing is corrosion resistant as standard and can be hot-dip galvanized and custom painted on customer request. The load applied to the product is identified by the color of the spring, and the spring is powder- coated. Rubber pads are attached to the bottom of the lower housing to prevent slipping and reduce the transmission of high-frequency vibrations.

- The FSL63 series, a model with a static displacement of 75mm, is used for heavy-duty equipment such as cooling towers, chillers, and others that have differences in installation weight. The mount is equipped with vertical displacement limiters on the left and right sides to deal with height changes caused by weight changes due to treatment for retained water. Failure to install vertical displacement limiters may cause severe deformation and damage to the pipes connected to the equipment. The upper housing is equipped with fixing bolts depending on the applied load, and a spring and leveling bolts on the upper housing to facilitate leveling. The housing is corrosion resistant as standard and can be hot-dip galvanized and custom painted on customer request. The load applied to the product is identified by the color of the spring, and the spring is powder- coated. Rubber pads are attached to the bottom of the lower housing to prevent slipping and reduce the transmission of high-frequency vibrations.

- The FSL64 series, a model with a static displacement of 100mm, is used for heavy-duty equipment such as cooling towers, chillers, and others that have differences in installation weight. The mount is equipped with vertical displacement limiters on the left and right sides to deal with height changes caused by weight changes due to treatment for retained water. Failure to install vertical displacement limiters may cause severe deformation and damage to the pipes connected to the equipment. The upper housing is equipped with fixing bolts depending on the applied load, and a spring and leveling bolts on the upper housing to facilitate leveling. The housing is corrosion resistant as standard and can be hot-dip galvanized and custom painted on customer request. The load applied to the product is identified by the color of the spring, and the spring is powder- coated. Rubber pads are attached to the bottom of the lower housing to prevent slipping and reduce the transmission of high-frequency vibrations.

- The FSL65 series, a model with a static displacement of 125mm, is used for heavy-duty equipment such as cooling towers, chillers, and others that have differences in installation weight. The mount is equipped with vertical displacement limiters on the left and right sides to deal with height changes caused by weight changes due to treatment for retained water. Failure to install vertical displacement limiters may cause severe deformation and damage to the pipes connected to the equipment. The upper housing is equipped with fixing bolts depending on the applied load, and a spring and leveling bolts on the upper housing to facilitate leveling. The housing is corrosion resistant as standard and can be hot-dip galvanized and custom painted on customer request. The load applied to the product is identified by the color of the spring, and the spring is powder- coated. Rubber pads are attached to the bottom of the lower housing to prevent slipping and reduce the transmission of high-frequency vibrations.